I'm trying to assign 2 separate virtual servers that need their own IP addresses for ssl. I have one shared IP and 2 other dedicated IP's bound to this server through webmin >> networking >> network configuration >> Network Interfaces >> eth0:1 and eth0:2
You can see here: http://216.83.111.209 https://test.clickacart.com http://216.83.111.205 https://core.clickacart.com
I go in and edit the virtual servers and put these IP's in Configurable settings >> external IP >> other IP. I also then enable ssl in the enable features section.
I tried putting the IP's in virtualmin >> Addresses and Networking >> Shared IP Addresses each per line.
Nothing seems to work to get these domains to come up separately showing their own website files and ssl. It only loads the /var/www/html folder for both.
btw, i'm on a kvm vps. Here's my ifconfig:
eth0 Link encap:Ethernet HWaddr 00:16:3C:D1:74:16 inet addr:216.83.111.210 Bcast:216.83.111.255 Mask:255.255.255.0 inet6 addr: fe80::216:3cff:fed1:7416/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:670972 errors:0 dropped:5595 overruns:0 frame:0 TX packets:291235 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:687742499 (655.8 MiB) TX bytes:48673052 (46.4 MiB) Interrupt:10 Base address:0x8000
eth0:1 Link encap:Ethernet HWaddr 00:16:3C:D1:74:16 inet addr:216.83.111.205 Bcast:216.83.111.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:10 Base address:0x8000
eth0:2 Link encap:Ethernet HWaddr 00:16:3C:D1:74:16 inet addr:216.83.111.209 Bcast:216.83.111.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:10 Base address:0x8000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4841 errors:0 dropped:0 overruns:0 frame:0 TX packets:4841 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:447465 (436.9 KiB) TX bytes:447465 (436.9 KiB)
What happens when you enter the respective IP address for each virtual server in Server Configuration / Change IP address : New IP address / Use private address?
To make sure your Apache virtual hosts are set up correctly, go to Webmin / Servers / Apache Webserver and check the Existing Virtual Hosts list there.
ok, i checked and yes, the IP's are still set to the main shared IP. but how do I change this? I can't find any setting to change the ip address in the virtual host area.
Well, for existing domains, the Change IP Address form does that: Change the IP address. So just enter the desired private IP there and click Change now. :)
For new domains, you enter the private IP under "IP address and forwarding" when creating the domain.
awesome! I knew it was easier than what I was making it out to be. I just did it so long ago I forgot and then looked up old forum posts that confused me and made it much more complicating for no reason. I removed the IP's from the network configuration area and changed the IP's and all is well.